I'm going through an introductory programming book and it lists a simple example in pseudocode:

  input myNumber
  set myAnswer = myNumber * 2
  output myAnswer

Why can't we omit creating another variable called myAnswer and just put the operation into the output command, like this:

  input myNumber
  output myNumber * 2

Why is the former correct and latter not?

  • 39
    Does the book say you can't? – Tulains Córdova Jul 10 '17 at 19:41
  • 2
    The book does not say that I can't; it doesn't say anything about it. – user1475207 Jul 10 '17 at 19:44
  • 5
    I think it's quite reasonable to start out with the shorter second block, then convert to the first if you need it. – Mateen Ulhaq Jul 10 '17 at 21:44
  • 13
    Short answer: you can, the author is just doing this (in an attempt) to make it clearer (although honestly, it probably doesn't actually make it clearer at all...). – Jules Jul 11 '17 at 0:36
  • 1
    Both ways work. With more experience you will find, that for serious coding readability is far more important than simplicity or originality of the code. Your code should be easily readable by many others maintaining it. – Frantisek Kossuth Jul 11 '17 at 8:58

You could but the other is so you see what is going on and so you can use myAnswer later in the program. If you use your second one, you cannot reuse myAnswer.

So later down in the program you might want:

myAnswer + 5
myAnswer + 1

You might have different operations you want to use it for.

Consider swapping numbers:

  input myNumber
  set myAnswerA = myNumber * 2
  output myAnswerA
  set myAnswerB = myNumber * 3
  output myAnswerB
  set temp = myAnswerA
  set myAnswerA = myAnswerB
  set myAnswerA = temp
  output myAnswerA
  output myAnswerB

That would be difficult without variables. Computer books start real basic, and most programming is easy until you see complexity. Most everything is trivial in tutorials, and it is only in complexity do you see where things do or do not make sense.

  • 1
    So it's valid logic but it's not best practise because it does't allow me to reuse the operation in other parts of the program? – user1475207 Jul 10 '17 at 19:45
  • @user1475207 See my edit. In this tiny program it doesn't matter. The author knows you'll be doing much more than outputting the value later on. It is only in complexity you get to see this. Stick with it. – johnny Jul 10 '17 at 19:47
  • ah ok, I see. I'll continue through the book with this in mind. Thanks. – user1475207 Jul 10 '17 at 19:52
  • 29
    @user1475207 Both ways have their place. Sometimes you may have to use the extra variable. Sometimes you may not need the extra variable but want to use it anyway because in some situations, just giving something a well-thought-out name makes it that much more clear. Sometimes you don't want to use the extra variable because it's just added noise. And many times, the difference doesn't really matter. – 8bittree Jul 10 '17 at 20:16
  • 3
    I think it's valid to return the result of an operation without assigning it to a variable beforehand. But I took the habit to create a result variable even for short functions, so that debugging by adding print(result) is really fast. It's more out of convenience than good practice though. – Right leg Jul 11 '17 at 9:17

Another reason, The assignment set myAnswer = myNumber * 2 gives the resulting value a name. A person reading the two line version of your code only knows that it prints out the value of myNumber * 2. A person reading the three line version can see that myNumber * 2 is the answer.

It may not seem important in such a trivial example, but sometimes, assigning a result value to a variable with a meaningful name can make it much easier for other programmers to read and understand your code.

  • 10
    +1, although this only applies when the name is meaningful. Using temporary vars like this named i, result, or some other meaningless identifier does nothing to improve clarity, and only clutters the code – Alexander Jul 10 '17 at 21:59
  • 7
    @Alexander: Meaningless names can still be meaningful. i had better be an array index. If there's a result, the function ought to end with return result or the moral equivalent. And so on... – Kevin Jul 11 '17 at 0:55
  • 6
    @Kevin "Meaningless names can still be meaningful" uhhh... are you sure? lol – Alexander Jul 11 '17 at 1:47
  • 3
    @Kevin If you're going to return result, then you may as well just inline to return whatever you were assigning to result. We can see it's a result. You're returning it, we get that. – Alexander Jul 11 '17 at 1:47
  • 5
    @Alexander: Obviously you can inline the return if it's a simple expression, but what if you need to build it up over multiple statements? Using a consistent naming scheme makes it clear what you are doing in these cases. – Kevin Jul 11 '17 at 6:17

That's pseudocode. It's not supossed to be any particular implemented language.

Some programming languages don't support evaluating an expression and then outoputting the result in the same line of code. For example most assemblers do not support that. Perhaps the author of the book wanted to show things in a low-level fashion.

  • 2
    And some languages (for example C) allow both at the same time - you can write things like "output (answer = answer * 2)" if you really want to! (but beware than "output (answer == answer * 2)" means something quite different... – alephzero Jul 11 '17 at 8:43

Other answers have addressed the specific mechanic details and examples of when one or the other form would be better, but I want to mention a little further background, sort of philosophical:

You're learning a language.

A language is something in which ideas can be expressed and understood (communicated). A computer programming language has the additional property that it can be mechanically parsed by a machine designed to take action (execute) based on ideas (decisions) that are specified and fed in using that language.

In ANY language that's at all useful, there is more than one way to express nearly any idea expressible in that language.

Consider the wide variety of nuance available in the English language. Even a simple sentence, such as

The cat jumped onto the box.

can be varied to express slightly different ideas or place emphasis on different parts of the scene while referring to the same exact physical universe action.

First are grammatical variations:

The box was jumped onto by the cat.

Onto the box jumped the cat.

Then are wider and wider variations, still referring to the same physical action:

The box shook under the impact of the cat.

The cat came down with a thud upon the top of the box.

The feline leaped lightly into the air and landed neatly on a nearby box.

Just look at the implications of the word "nearby" in that last sentence. Its inclusion conveys a whole new range of concepts not otherwise present.

There is always more than one way to do it, Python Zen to the contrary.

Of course, there will be ONE way which perfectly expresses your intention and is most suitable, just as you would choose only ONE of the English sentences above depending on exactly what you wished to communicate. That's what the Zen of Python is about.

But in an introductory programming course or an introductory English course, you must first learn the various ways (wordings, code snippets) in which you can couch an idea before you will develop the judgment to choose which is most perfectly fitting.

  • 3
    Of course, Python breaks its own rule. You have lambdas and nested functions; loops, list comprehensions, and generator expressions; floats, Decimals, and fractions; and __init__ and __new__, just to name a few. The point is that each is appropriate to a subtly different problem. You wouldn't pick one of those English sentences at random, nor would you pick one of these Python language features at random. – Kevin Jul 11 '17 at 1:02
  • 1
    @Kevin, yes, agreed. The point is that for someone totally new to programming, the exactness of the syntax required can make it seem that there is only one way anything can be accomplished—i.e., copying the exact code from the tutorial verbatim, similar to how middle school math problems (573 x 247) have only one right answer. See also questions like "What is the program to shrink files?" If you read my answer, I'm not saying to do anything at random; I'm saying that you are always making choices when you program. – Wildcard Jul 11 '17 at 1:11
  • 1
    That's certainly fair. I think the problem is that you're kind of simplifying/misrepresenting the Zen of Python a bit. The whole point is that those decisions are ultimately dictated by the contours of your problem, and not choices you can make freely. You may need to go through a lot of iteration and refactoring to find the one way to do it, the one way that perfectly fits your requirements, is readable, concise, even elegant. But for any given problem, there should be such an ideal solution, and a well-designed language will gently guide you towards it. That's what the Zen means. – Kevin Jul 11 '17 at 1:19
  • 4
    A cynic might say 'In Python there is only one way to do it, but every new version of Python applies the "and now for something completely different" function to the way the previous version did it' ;) – alephzero Jul 11 '17 at 8:46
  • 3
    quote from PEP20: "There should be one—and preferably only one—obvious way to do it. Although that way may not be obvious at first unless you're Dutch." – vaxquis Jul 11 '17 at 14:54

You are asking only about the myAnswer variable that seems to be redundant. Other answers already explaind some of the why and when it would make sense to omit or use it but here's one more: how about this?

  output input * 2

or even that

Start output input * 2 Stop

In most languages this would still work but can you read it? It's difficult so we often use helper variables because computers are not the only ones who read the code. We need to maintain it and understand it in few months and it's even harder to write code that you can still unterstand later then a working one... usually after only a few days you won't know why you did something in a specific way.

  • 2
    ...or even just (*2). I would object, however, that performing input can't necessarily be expressed safely as just accessing a variable / performing an arithmetic operation: it can have observable side-effects. – leftaroundabout Jul 11 '17 at 8:25

You can do both variants (in this simple case), but the first variant becomes more readable and structured for more complex cases. The first variant shows the IPO model with one line for each step (two of those already with the right name):

  input myNumber                       // Input
  set myAnswer = myNumber * 2          // Process
  output myAnswer                      // Output

protected by gnat Jul 12 '17 at 6:14

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.